Care Instructions
Our products are available in a variety of finishes that should give many years service, under normal circumstances. We recommend our products are cleaned using a soft cloth moistened with soapy water to remove any deposits or alternatively wiped over using a soft cloth with beeswax.

Under no circumstances use any form of metal cleaner, aerosol sprays or solvent based products.

Cupboard Knobs
All cupboard knob dimensions are shown in metric (mm), and show the knob and rose size. This information is important when fitting knobs to a narrow door stile, or when a rose detail may overlap on drawer panel detail.

Pull Handles
All cabinet pull handle dimensions are shown in metric (mm), and show bolt centre (c/c) and projection (<>). This information is important for accurate fitting, or where specifications may demand a minimum distance between cabinet face and handle for ease of use.

Fixings
All knobs and handles are supplied with M4 threaded bolts as standard. When it is desirable to fit a knob without the bolt showing from the back, we would suggest using an FTD845 dowel screw. This allows for blind fixing by drilling a pilot hole in the front of the drawer / door, then carefully screwing the cupboard knob in place.